Don't do what most people do and only clip into one bolt to thread the anchors. I have seen bolts get pulled out by hand. The DUAL CONNECT adjust fixes this problem.
Adjustable double lanyard for climbing and mountaineering.
Designed for multi-pitch climbing and mountaineering, DUAL CONNECT ADJUST is an adjustable double lanyard that allows users to tether themselves to an anchor and install a rappel system. The adjustable arm allows the length to be adapted for easier handling. Because of its ergonomics, the ADJUST rope adjuster allows quick and easy one-handed adjustment.
Adjustable double lanyard allows users to tether themselves to an anchor and install a rappel system in multi-pitch climbing and mountaineering
Double lanyard with one fixed arm and one adjustable arm:
- 45 cm fixed arm
- 15 to 95 cm adjustable arm
- the ADJUST rope adjuster’s ergonomics make it easy to manipulate, for quick and precise adjustment of the adjustable arm
- dynamic rope lanyard, to reduce the force transmitted to the user in the event of a short fall (1)
Easy to use:
- the connector is held in position by a rubber ring, to facilitate clipping
- one-handed adjustment
- used with two SPIRIT SCREW-LOCK-type locking carabiners
- attaches to the belay loop with a simple girth hitch
(1) For use below the anchor point: positioning lanyards do not have an energy absorber. These lanyards must only be used when the potential fall factor is less than 1.
Specifications
Fixed arm length: 45 cm
Adjustable arm length: 15 to 95 cm
Weight: 160 g
Certification(s): CE, UKCA, UIAA 109
Can I use any locking carabiner with my Petzl Dual Connect adjust?
No, some locking carabiners are shaped in such a way that the locking mechanism in the connect adjust doesn't sit well in the bottom the carabiner. Ovals and HMS carabiners normally work well. Petzl recommends the Sm'D twistlock.
